No Products in the Cart
* (Due to COVID19 Delays, this product is Delivered in 3- 6 weeks)
* This product incurs shipping fees because of its size and weight.
Superior performance: Using reverse osmosis filtration technology with a filtration accuracy of 0. 0001um, the system can effectively remove most contaminants including fluoride, TDS, limescale, and heavy metals in your tap water.
The first multistage composite filter element: It is the first smart RO system with composite filters and tankless design in the Australian market.
No-tank design: Use new composite filter element technology to more efficiently filter out harmful substances. The tankless design helps you avoid secondary pollution and enjoy more storage space in your kitchen.
Fast Water Filtration: Thanks to its internal water pump, the RO system offers faster water flow (600 gallons per day). It can produce pure water quickly, thereby meeting the needs of your whole family and even small companies.
1.5: 1 low drain ratio: Compared to traditional RO systems, our Reverse Osmosis Water Filtration System saves water waste. Save money on your water bills while running the RO system.
Q: Why there are many white bubbles in the water?
A: Normally for the first time use of the RO system, the water seems to have white bubbles in it, which is normal and totally drinkable. It is because when the pump is pressurizing the water, it will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility further increases. The air can’t be released at that time because of the pressure in the RO system.
However, when you turn on the tap to get a cup of water, the pressure of air is released. So you will see a huge number of bubbles in the water. It looks cloudy and white, but they are just bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally good for drinking.
Q: TDS tester pen shows a higher result than the TDS number displayed on the PD600?
A: It is because the TAM3 filter, the post-filter, adds the minerals to the water. Normally the TAM3 will increase the TDS by 10-30 ppm. If the system hasn’t been used for a while, the TAM3 will restore more minerals to the water, and at that time the water is very good, the PH level will be more than 9.
Q: Why TDS is higher at the beginning, but back to normal range after about one minute?
A: Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional RO system or tankless RO system. When the RO system starts to work, pressure from the pump overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes the impurities. When the RO system stops working, the pump stops offering pressure as well. At that time, because of different concentrations, a small fraction of ions will enter into pure water and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the beginning, the quality water is still unbeatable by any other filtration methods including carbon, KDF, ceramic, UF, UV, etc. The water is totally good to drink and you don’t have to wait for about 1 minute to get the water, since the whole system will not release any harmful substances to the water. The TDS removing rate for PD600 is about 94-95% of your incoming TDS is high, the outlet TDS will be high too.
Q: How does the TDS display on the machine work?
A: When the system is running, the TDS sensor in the PD600 will keep testing the water quality every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory. If you want to have the real-time TDS result, please let the machine run for about 1 minute.